LP4 S8 TR PLUS

LP4 S8 TR PLUS

Description

Cart 1350×725 mm

Useful height 820 mm

Baskets / h 20

Completely pressed tank stairs
Double wall
Wash / rinse arms in stainless steel self
Double tank filter with small removable sink for waste + pump filter
Self cleaning vertical pump
Series of rinse pump
Electronics
4 Cycle
Saving Energy
Thermostop to ensure rinsing temperature in accordance with HACCP
START touch pad with multi color
TR: STEAM CONDENSER AND HEAT HEAT ENERGY SAVINGS, ATTENTION TO THE ENVIRONMENT
AND WELL-BEING With models LP2 / 3/4 STR Over washing battery range and washing utensils, DIHR allows you to save the ! energy consumption up to 50% TR system is a collector / condenser mists: wet and hot steam is sucked directly when the door is still closed and used to heat the cold supply water to 50 ° C. This system reduces the energy consumption is required to wait 85 ° C for the final rinse is the annual cost for electricity. Depending on the model you can save: 3.5 kWh (lp2 / 3) to 5.5 kWh (Lp4) which correspond to € 2.810 * (LP2 / 3) and € 4.416 * (LP / 4) per year. * Calculated: 0.275 cent / kWh for 8 hours / day for 365 days / TR an.De more obvious how technology improves the quality of the premises. Through the heat exchanger, the air temperature discharged by the machine is reduced by more than half. Absolute humidity is a reduced about 20% compared to the vapors emitted by a machine without heat recovery, it ensures well-being of the operator key
SYTEME DIHR PLUS
rinse water temperature and constant pressure. DIHR has developed a new system to rinse temperature and pressure observations,
with the most water system is sucked through a superheater suppressor and sent to the flushing nozzles ,: also With Break Tank machine is independent from the system pressure and the rinsing is ensured even in case of low water pressure. The water temperature remains constant during the entire rinse cycle (85 ° C), for recharging the boiler is made ​​to finished rinsing, avoiding the mixing of the waters. System « Break Tank » prevents the return to the water supply of the machine network become undrinkable by the wash, rinsing and washing of the residue. This is a classified system AA « maximum effective » as required by the EN1 717 standard for « protection against backflow in the water network. »