Basket 500×500 mm

H useful 450 mm

Road / Ora 100

3600-1800/Mr

Series AX Compact dishwashers are designed to meet the needs of typical productivity of small and medium food, combining small dimensions, high-performance.
Reversible and customizable. The new AX 161 never ceases to surprise you! The direction of travel and all accessories, in a short time and with simple operations, can be prepared and assembled in both sides of the machine offering multiple solutions. AX 161 is the practical answer to a quick and prompt delivery…with the benefits of compact.

Panel touch screen controls, low voltage, with degree of protection IP65, built with membrane keypad for easy cleaning. Simple and intuitive, allows you to control the operating temperature and the state of the machine thanks to the scrolling text and multilingual service self-diagnosis,that indicates any alarms and faults in accordance with HACCP regulations.
Wash arms and rinse stainless steel, removable without the use of tools for ordinary cleaning
Protection filters in stainless steel tanks, easily removable without removing the spray arms, to keep the wash water free from heavy dirt and food residues.
Feed system double drive side which prevents the derailment of the baskets, with friction to protect the feed motor in case of block.
Boiler in stainless steel 316, insulated to reduce heat loss
Bring double wall insulated, counterbalanced and equipped with fall protection system
Tanks stainless steel AISI 316 High resistance to corrosion. Overflow with integrated support antiextraction, allows you to empty the tanks without being removed.
Two speed drive system with built-fraction. On request is available the option "inverter" to change the drive speed according to individual needs.
Self-timer that switches pumps, engine, drag and any optionals after a preset time allowing a reduced consumption.
Saving rinsing and pressure reducer. The first rinsing active only in the presence of baskets in the area dedicated avoiding unnecessary waste of water, the second device allows to optimize the network pressure, stabilizing, for an excellent rinse and a reduction in consumption.
Wash pumps vertical, autopulenti, thermally protected and high yield for the guarantee of a continuous service.
Check valve prevents backflow of water into the water supply of the dishwasher preventing contamination in the case of depression outdoors
DRYING (6Kw) in line or curve mechanized 90 °, using a strong jet of preheated air that guarantees perfect dishes dry (Optional)
Sanitization system includes sanitizing dispenser for proper cleaning and maintenance of the machine at the end of the daily service (Optional)
MONITORING HACCP software is available on demand data management with the possibility of accumulation in memory of alarms (Optional)
Heat recovery in case of power boiler with cold water (the load tank start operations must be carried out with hot water), This device allows you to recover and reuse the heat of the machine to preheat the cold water supply (Optional)

H useful 450 mm

Basket 500×500 mm

Road / Ora 80-110

3960-1980/Mr

DIHR technology presents the new dellelavastoviglie rack conveyor…

A variety of models can be combined with multiple accessories to offer solutions that are customized to meet the different needs of the customer. Considering the required productivity, the space offered, the power available, our machines are suitable for the most diverse environments and workloads more intense as canteens, hospitals, catering, small and large hotels, schools. The ability to install the heat recovery unit optimizes energy savings and cost containment and consumption, with particular attention to safeguarding the environment.

RR: MODELS WITH DOUBLE RINSE Provides water savings, rinse and electricity thanks to prerinsing. The rinse water is in fact picked up and conveyed to the two arms of pre-rinse in order to minimize the amount necessaria.Grazie to the renewed double rinsing system RR we got a radical reduction of consumption of water by bringing to a liter of water (about) to basket: well below the best standards of mercato.Questo result, in addition to having respect for the environment, saves significantly on the cost of chemicals and reduces the energy requirements.

Tanks stainless steel AISI 316 rayed, with large gradients that facilitate emptying; overflow with integrated support antiextraction, allows you to empty the tanks without being removed.
Wash arms with bayonet and concave self cleaning nozzles, equipped with a flow regulator. The conformation of the wash arms and rinse allows to reduce the consumption of water. The nozzles are made of stainless steel.
Wash pumps vertical, Self-cleaning and protected from electrical overload. A double set of filters protects them from food residues and any cutlery falls from the baskets.
Doors Double skin insulated offset and include system security anticaduta.L'ampia structure allows the operator to easily reaching every point inside. The return springs leads are protected against accidental impact with any object protruding from the baskets.
Boilers stainless steel AISI 316 resistant to chemical attack, insulated to reduce heat loss.
Bath prerinsing radiused, designed to contain the heat loss and to ensure a double rinsing at high temperatures. Prerinsing arms and final rinse with stainless steel nozzles.
Thermal and acoustic insulation on request, a further insulation of the machine allows to minimize heat loss and temperature of the surface by reducing energy consumption. At the same time minimizes the noise making the environment more comfortable working.
Rinsing is controlled by solenoid valves resistant to water having a temperature of 70 ° C and are able to operate also at very low pressures of the network. The pressure reducer network is standard.
The DIHR drying system uses a powerful jet of preheated air that guarantees perfect dishes dry
Optional steam condenser, recommended in case of installation in poorly ventilated areas or lacking adequate ventilation system.
Le normative DIN 10510, in order to obtain sanitization of the dishes, provide for a minimum contact time of the detergent on the surface to sanitize, proportional to the bacterial load present on the surfaces themselves. Dishwashers DIHR ensure compliance with this legislation.
TR91 heat recovery. This option allows the power of the machine with cold water * ensuring contemporanteamente saving energy. The steam produced inside the machine (that would otherwise be lost in the workplace), is sucked in a targeted way and then passed through a heat exchanger (air - water). This step allows the transfer of energy loss of steam, water supply, bringing the temperature of the same at about 45 ° C, with consequent reduction of energy consumption of approximately 6 kW * entering water temperature below 25 ° C

Road / Ora 90-140

H useful 450 mm

Basket 500×500 mm

5040-2520/Mr

DIHR technology presents the new dellelavastoviglie rack conveyor…

A variety of models can be combined with multiple accessories to offer solutions that are customized to meet the different needs of the customer. Considering the required productivity, the space offered, the power available, our machines are suitable for the most diverse environments and workloads more intense as canteens, hospitals, catering, small and large hotels, schools. The ability to install the heat recovery unit optimizes energy savings and cost containment and consumption, with particular attention to safeguarding the environment.

RR: MODELS WITH DOUBLE RINSE Provides water savings, rinse and electricity thanks to prerinsing. The rinse water is in fact picked up and conveyed to the two arms of pre-rinse in order to minimize the amount necessaria.Grazie to the renewed double rinsing system RR we got a radical reduction of consumption of water by bringing to a liter of water (about) to basket: well below the best standards of mercato.Questo result, in addition to having respect for the environment, saves significantly on the cost of chemicals and reduces the energy requirements.

Tanks stainless steel AISI 316 rayed, with large gradients that facilitate emptying; overflow with integrated support antiextraction, allows you to empty the tanks without being removed.
Wash arms with bayonet and concave self cleaning nozzles, equipped with a flow regulator. The conformation of the wash arms and rinse allows to reduce the consumption of water. The nozzles are made of stainless steel.
Wash pumps vertical, Self-cleaning and protected from electrical overload. A double set of filters protects them from food residues and any cutlery falls from the baskets.
Doors Double skin insulated offset and include system security anticaduta.L'ampia structure allows the operator to easily reaching every point inside. The return springs leads are protected against accidental impact with any object protruding from the baskets.
Boilers stainless steel AISI 316 resistant to chemical attack, insulated to reduce heat loss.
Bath prerinsing radiused, designed to contain the heat loss and to ensure a double rinsing at high temperatures. Prerinsing arms and final rinse with stainless steel nozzles.
Thermal and acoustic insulation on request, a further insulation of the machine allows to minimize heat loss and temperature of the surface by reducing energy consumption. At the same time minimizes the noise making the environment more comfortable working.
Rinsing is controlled by solenoid valves resistant to water having a temperature of 70 ° C and are able to operate also at very low pressures of the network. The pressure reducer network is standard.
The DIHR drying system uses a powerful jet of preheated air that guarantees perfect dishes dry
Optional steam condenser, recommended in case of installation in poorly ventilated areas or lacking adequate ventilation system.
Le normative DIN 10510, in order to obtain sanitization of the dishes, provide for a minimum contact time of the detergent on the surface to sanitize, proportional to the bacterial load present on the surfaces themselves. Dishwashers DIHR ensure compliance with this legislation.
TR91 heat recovery. This option allows the power of the machine with cold water * ensuring contemporanteamente saving energy. The steam produced inside the machine (that would otherwise be lost in the workplace), is sucked in a targeted way and then passed through a heat exchanger (air - water). This step allows the transfer of energy loss of steam, water supply, bringing the temperature of the same at about 45 ° C, with consequent reduction of energy consumption of approximately 6 kW * entering water temperature below 25 ° C

Basket 500×500 mm

H useful 450 mm

Road / Ora 150

5400-2700/Mr

Series AX Compact dishwashers are designed to meet the needs of typical productivity of small and medium food, combining small dimensions, high-performance.

Economia…non solo di spazio!

Con AX 290 puoi permetterti il prelavaggio anche quando lo spazio a disposizione è limitato. Infatti in un unico modulo l’efficacia del prelavaggio va a sommarsi al lavaggio e al risciacquo, il tutto a norma DIN.

E con gli economizzatori di serie si evitano inutili sprechi di acqua, energia e detersivo.

Panel touch screen controls, low voltage, with degree of protection IP65, built with membrane keypad for easy cleaning. Simple and intuitive, allows you to control the operating temperature and the state of the machine thanks to the scrolling text and multilingual service self-diagnosis,that indicates any alarms and faults in accordance with HACCP regulations.
Wash arms and rinse stainless steel, removable without the use of tools for ordinary cleaning
Protection filters in stainless steel tanks, easily removable without removing the spray arms, to keep the wash water free from heavy dirt and food residues.
Feed system double drive side which prevents the derailment of the baskets, with friction to protect the feed motor in case of block.
Boiler in stainless steel 316, insulated to reduce heat loss
Bring double wall insulated, counterbalanced and equipped with fall protection system
Tanks stainless steel AISI 316 High resistance to corrosion. Overflow with integrated support antiextraction, allows you to empty the tanks without being removed.
Two speed drive system with built-fraction. On request is available the option "inverter" to change the drive speed according to individual needs.
Self-timer that switches pumps, engine, drag and any optionals after a preset time allowing a reduced consumption.
Saving rinsing and pressure reducer. The first rinsing active only in the presence of baskets in the area dedicated avoiding unnecessary waste of water, the second device allows to optimize the network pressure, stabilizing, for an excellent rinse and a reduction in consumption.
Wash pumps vertical, autopulenti, thermally protected and high yield for the guarantee of a continuous service.
Check valve prevents backflow of water into the water supply of the dishwasher preventing contamination in the case of depression outdoors
DRYING (6Kw) in line or curve mechanized 90 °, using a strong jet of preheated air that guarantees perfect dishes dry (Optional)
Sanitization system includes sanitizing dispenser for proper cleaning and maintenance of the machine at the end of the daily service (Optional)
MONITORING HACCP software is available on demand data management with the possibility of accumulation in memory of alarms (Optional)
Heat recovery in case of power boiler with cold water (the load tank start operations must be carried out with hot water), This device allows you to recover and reuse the heat of the machine to preheat the cold water supply (Optional)

Basket 500×500 mm

H useful 450 mm

Road / Ora 140-190

6840-3420/Mr

DIHR technology presents the new dellelavastoviglie rack conveyor…

A variety of models can be combined with multiple accessories to offer solutions that are customized to meet the different needs of the customer. Considering the required productivity, the space offered, the power available, our machines are suitable for the most diverse environments and workloads more intense as canteens, hospitals, catering, small and large hotels, schools. The ability to install the heat recovery unit optimizes energy savings and cost containment and consumption, with particular attention to safeguarding the environment.

RR: MODELS WITH DOUBLE RINSE Provides water savings, rinse and electricity thanks to prerinsing. The rinse water is in fact picked up and conveyed to the two arms of pre-rinse in order to minimize the amount necessaria.Grazie to the renewed double rinsing system RR we got a radical reduction of consumption of water by bringing to a liter of water (about) to basket: well below the best standards of mercato.Questo result, in addition to having respect for the environment, saves significantly on the cost of chemicals and reduces the energy requirements.

Tanks stainless steel AISI 316 rayed, with large gradients that facilitate emptying; overflow with integrated support antiextraction, allows you to empty the tanks without being removed.
Wash arms with bayonet and concave self cleaning nozzles, equipped with a flow regulator. The conformation of the wash arms and rinse allows to reduce the consumption of water. The nozzles are made of stainless steel.
Wash pumps vertical, Self-cleaning and protected from electrical overload. A double set of filters protects them from food residues and any cutlery falls from the baskets.
Doors Double skin insulated offset and include system security anticaduta.L'ampia structure allows the operator to easily reaching every point inside. The return springs leads are protected against accidental impact with any object protruding from the baskets.
Boilers stainless steel AISI 316 resistant to chemical attack, insulated to reduce heat loss.
Bath prerinsing radiused, designed to contain the heat loss and to ensure a double rinsing at high temperatures. Prerinsing arms and final rinse with stainless steel nozzles.
Thermal and acoustic insulation on request, a further insulation of the machine allows to minimize heat loss and temperature of the surface by reducing energy consumption. At the same time minimizes the noise making the environment more comfortable working.
Rinsing is controlled by solenoid valves resistant to water having a temperature of 70 ° C and are able to operate also at very low pressures of the network. The pressure reducer network is standard.
The DIHR drying system uses a powerful jet of preheated air that guarantees perfect dishes dry
Optional steam condenser, recommended in case of installation in poorly ventilated areas or lacking adequate ventilation system.
Le normative DIN 10510, in order to obtain sanitization of the dishes, provide for a minimum contact time of the detergent on the surface to sanitize, proportional to the bacterial load present on the surfaces themselves. Dishwashers DIHR ensure compliance with this legislation.
HACCP is available on demand software data management with the possibility of accumulation of information in memory (temperature, alarms and status of the machine) with the possibility of consulting a daily / weekly / monthly
TR91 / TR98 heat recovery. This option allows the power of the machine with cold water * ensuring contemporanteamente saving energy. The steam produced inside the machine (that would otherwise be lost in the workplace), is sucked in a targeted way and then passed through a heat exchanger (air - water). This step allows the transfer of energy loss of steam, water supply, bringing the temperature of the same at about 45 ° C, with consequent reduction of energy consumption of approximately 6 kW for TR91 and 11 kW for TR98 * entering water temperature below 25 ° C
TR99 / 1 regenerator heat pump calore.Questo option allows the power of the machine with cold water and *, thanks to the heat pump (which has a higher heating effect compared to a traditional heat recovery), you get an important energy recovery. At the same time, the effect of the heat exchanger, the system enters into the fresh air and dehumidified. The steam produced inside the machine (that would otherwise be lost in the workplace), is conveyed and made to pass through a heat exchanger with heat pump (air - water). This step allows the transfer of the hot and humid steam, water supply, bringing the temperature of the same at about 45 ° C, with a consequent reduction of energy consumption up to 14/16 kW. *entering water temperature below 25 ° C

H useful 450 mm

Basket 500×500 mm

Normal speed 150 racks/h

Speed ​​DIN 10510 100 racks/h

Maximum speed 250 racks/h

5400-2700/Mr

The dishwasher rack conveyor range RX OPTIMA reach new heights of efficiency.

The rinse system in three phases 3Rplus ensures water consumption considerably reduced and quality of the result. The rinse system in three phases 3Rplus ensures water consumption considerably reduced and quality of the result. The perfect thermal insulation of walls, reuse of the heat of the vapors produced inside the machine, the recovery of the heat of the water to the discharge, are some of the strengths of this range that features the cast down-chin total waste. The simplicity and ease of use characterize both the phase of work that the daily operations of cleaning and maintenance. The practical and large display simplifies access to the functions of the machine by the operator. The control panel IP55, the washing arms rack, the optional sanitizing machine and unloading system makes easier the operations end of the day.

STANDARD:

Voltage 400V3N50Hz.
Variable speed conveyor
Washing arms rack
Thermal and acoustic insulation
Isolation washing tanks
Rinse at variable flow
Centralized drain
Electrical panel IP55
Capacitive touch keypad and TFT display
Break Tank
Autotimer
Saving detergent (DDSS).
Self-cleaning battery heat recovery.
Electrical preparations dosing unit.
Interface Ready HACCP
Counter of operating hours.
Counter of water consumption,based on operating hours.
Counter power consumption,based on operating hours.
Ability to turn off the heating elements drying,during operation

OPTIONAL

HDR 200: Drying + Heat recovery.
HDRA209M ed HDRA218M:Drying + RecuperatoreTermico curve motorizzataa 90 ° or 180 °.
AS45:prewash module with filter drawer.
Emptying automated servo valves.
Sanitizing machine.
CentralinaTwindose.
Dispensers peristaltic.
Stainless steel washing pumps.
Supervisor HACCP.
Corner entry 90 ° with prewash.
Voltage 230-240V350Hz.
Extra Voltage 60Hz
Shipping more parts
BENEFITS FROM NEW HDR THERMAL RECOVERY + DRYING

Reduction of installed boiler
Reduction of installed drying
No additional consumption for maintaining the temperature of the prewash
Cooling air outlet and steam condenser.
Reduction of temperature of the waste water.
Pre-soak dishes.
HDR

The module HDR Heat recovery + Drying, achieves significant energy savings. Uses the heat, otherwise dispersed into the surrounding environment, to preheat both the rinsing water to which the air used for the asciugatura.Le working environment conditions are preserved due to the clearing of the outlet air temperature and discharge water and the total power installed is significantly reduced. The installation of this option allows the power of the machine with cold water and allows for the in-sciugatura dishes with zero operating costs compared to the same machine without optional HDR. The HDR module is available both online and on motorized curve at 90 ° or 180 ° (respectively HDR200, HDRA209M,HDRA218M).

AUTOMATED DRAINING

LESS WORK AND ALWAYS CLEAN WATER
Altermine work cycle just touch a button to empty the tanks, without needing to remove any overflow and enter into contact with the solution of lavaggio.Grazie to servo valves dedicated to each tank is possible to make the emptying of tanks sun prewash. This will ensure the continuous regeneration and balanced water prewash, without waste and with immediate benefit for the washing steps subsequent. With automated unloading, in addition to, the possibility of programming the filling and the heating of the tanks in anticipation of the work session later, allows to reach the maximum level of comfort.

CONSUMPTION

3R PLUS
The gaming rinsing 3Rplus is characterized by three phases, two of which utilize circulating water and remove most of the detergent from the crockery. Thanks to the nozzles and the differentiated system break-tank with electric pump dedicated, the flow of water on the dishes is always well distributed and constant. The inverter series, a pump control rinse, for-puts to calibrate the water consumption to the actual speed of advance of the convogliatore.Inoltre, the consumption of clean water at low temperature, for cooling the prewash, is completely demolished, grazie all’optional HDR.

USER INTERFACE

SIMPLICITY 'AND COMPLETENESS

The user interface with menus tiered and differentiated access, provides comprehensive and targeted both for the user and for the technician.
Large TFT 7 "
Capacitive touch control panel
Hotkeys peri commands operator
Continuous monitoring of the working parameters
Detailed information on alerts
Information relating to the hours of operation and fuel consumption.
Historical alarms and events
Interface HACCP
Level management of chemicals and related alarms and information
Reminder scheduled maintenance
Tips to maximize performance and efficiency

H useful 450 mm

Basket 500×500 mm

Normal speed 190 racks/h

Speed ​​DIN 10510 135 racks/h

Maximum speed 300 racks/h

6840-3420/Mr

The dishwasher rack conveyor range RX OPTIMA reach new heights of efficiency.

The rinse system in three phases 3Rplus ensures water consumption considerably reduced and quality of the result. The rinse system in three phases 3Rplus ensures water consumption considerably reduced and quality of the result. The perfect thermal insulation of walls, reuse of the heat of the vapors produced inside the machine, the recovery of the heat of the water to the discharge, are some of the strengths of this range that features the cast down-chin total waste. The simplicity and ease of use characterize both the phase of work that the daily operations of cleaning and maintenance. The practical and large display simplifies access to the functions of the machine by the operator. The control panel IP55, the washing arms rack, the optional sanitizing machine and unloading system makes easier the operations end of the day.

STANDARD:

Voltage 400V3N50Hz.
Variable speed conveyor
Washing arms rack
Thermal and acoustic insulation
Isolation washing tanks
Rinse at variable flow
Centralized drain
Electrical panel IP55
Capacitive touch keypad and TFT display
Break Tank
Autotimer
Saving detergent (DDSS).
Self-cleaning battery heat recovery.
Electrical preparations dosing unit.
Interface Ready HACCP
Counter of operating hours.
Counter of water consumption,based on operating hours.
Counter power consumption,based on operating hours.
Ability to turn off the heating elements drying,during operation

OPTIONAL

HDR 200: Drying + Heat recovery.
HDRA209M ed HDRA218M:Drying + RecuperatoreTermico curve motorizzataa 90 ° or 180 °.
AS45:prewash module with filter drawer.
Emptying automated servo valves.
Sanitizing machine.
CentralinaTwindose.
Dispensers peristaltic.
Stainless steel washing pumps.
Supervisor HACCP.
Corner entry 90 ° with prewash.
Voltage 230-240V350Hz.
Extra Voltage 60Hz
Shipping more parts
BENEFITS FROM NEW HDR THERMAL RECOVERY + DRYING

Reduction of installed boiler
Reduction of installed drying
No additional consumption for maintaining the temperature of the prewash
Cooling air outlet and steam condenser.
Reduction of temperature of the waste water.
Pre-soak dishes.
HDR

The module HDR Heat recovery + Drying, achieves significant energy savings. Uses the heat, otherwise dispersed into the surrounding environment, to preheat both the rinsing water to which the air used for the asciugatura.Le working environment conditions are preserved due to the clearing of the outlet air temperature and discharge water and the total power installed is significantly reduced. The installation of this option allows the power of the machine with cold water and allows for the in-sciugatura dishes with zero operating costs compared to the same machine without optional HDR. The HDR module is available both online and on motorized curve at 90 ° or 180 ° (respectively HDR200, HDRA209M,HDRA218M).

AUTOMATED DRAINING

LESS WORK AND ALWAYS CLEAN WATER
Altermine work cycle just touch a button to empty the tanks, without needing to remove any overflow and enter into contact with the solution of lavaggio.Grazie to servo valves dedicated to each tank is possible to make the emptying of tanks sun prewash. This will ensure the continuous regeneration and balanced water prewash, without waste and with immediate benefit for the washing steps subsequent. With automated unloading, in addition to, the possibility of programming the filling and the heating of the tanks in anticipation of the work session later, allows to reach the maximum level of comfort.

CONSUMPTION

3R PLUS
The gaming rinsing 3Rplus is characterized by three phases, two of which utilize circulating water and remove most of the detergent from the crockery. Thanks to the nozzles and the differentiated system break-tank with electric pump dedicated, the flow of water on the dishes is always well distributed and constant. The inverter series, a pump control rinse, for-puts to calibrate the water consumption to the actual speed of advance of the convogliatore.Inoltre, the consumption of clean water at low temperature, for cooling the prewash, is completely demolished, grazie all’optional HDR.

USER INTERFACE

SIMPLICITY 'AND COMPLETENESS

The user interface with menus tiered and differentiated access, provides comprehensive and targeted both for the user and for the technician.
Large TFT 7 "
Capacitive touch control panel
Hotkeys peri commands operator
Continuous monitoring of the working parameters
Detailed information on alerts
Information relating to the hours of operation and fuel consumption.
Historical alarms and events
Interface HACCP
Level management of chemicals and related alarms and information
Reminder scheduled maintenance
Tips to maximize performance and efficiency

H useful 450 mm

Basket 500×500 mm

Normal speed 240 racks/h

Speed ​​DIN 10510 150 racks/h

Maximum speed 330 racks/h

8640-4320/Mr

The dishwasher rack conveyor range RX OPTIMA reach new heights of efficiency.

The rinse system in three phases 3Rplus ensures water consumption considerably reduced and quality of the result. The rinse system in three phases 3Rplus ensures water consumption considerably reduced and quality of the result. The perfect thermal insulation of walls, reuse of the heat of the vapors produced inside the machine, the recovery of the heat of the water to the discharge, are some of the strengths of this range that features the cast down-chin total waste. The simplicity and ease of use characterize both the phase of work that the daily operations of cleaning and maintenance. The practical and large display simplifies access to the functions of the machine by the operator. The control panel IP55, the washing arms rack, the optional sanitizing machine and unloading system makes easier the operations end of the day.

STANDARD:

Voltage 400V3N50Hz.
Variable speed conveyor
Washing arms rack
Thermal and acoustic insulation
Isolation washing tanks
Rinse at variable flow
Centralized drain
Electrical panel IP55
Capacitive touch keypad and TFT display
Break Tank
Autotimer
Saving detergent (DDSS).
Self-cleaning battery heat recovery.
Electrical preparations dosing unit.
Interface Ready HACCP
Counter of operating hours.
Counter of water consumption,based on operating hours.
Counter power consumption,based on operating hours.
Ability to turn off the heating elements drying,during operation

OPTIONAL

HDR 200: Drying + Heat recovery.
HDRA209M ed HDRA218M:Drying + RecuperatoreTermico curve motorizzataa 90 ° or 180 °.
AS45:prewash module with filter drawer.
Emptying automated servo valves.
Sanitizing machine.
CentralinaTwindose.
Dispensers peristaltic.
Stainless steel washing pumps.
Supervisor HACCP.
Corner entry 90 ° with prewash.
Voltage 230-240V350Hz.
Extra Voltage 60Hz
Shipping more parts
BENEFITS FROM NEW HDR THERMAL RECOVERY + DRYING

Reduction of installed boiler
Reduction of installed drying
No additional consumption for maintaining the temperature of the prewash
Cooling air outlet and steam condenser.
Reduction of temperature of the waste water.
Pre-soak dishes.
HDR

The module HDR Heat recovery + Drying, achieves significant energy savings. Uses the heat, otherwise dispersed into the surrounding environment, to preheat both the rinsing water to which the air used for the asciugatura.Le working environment conditions are preserved due to the clearing of the outlet air temperature and discharge water and the total power installed is significantly reduced. The installation of this option allows the power of the machine with cold water and allows for the in-sciugatura dishes with zero operating costs compared to the same machine without optional HDR. The HDR module is available both online and on motorized curve at 90 ° or 180 ° (respectively HDR200, HDRA209M,HDRA218M).

AUTOMATED DRAINING

LESS WORK AND ALWAYS CLEAN WATER
Altermine work cycle just touch a button to empty the tanks, without needing to remove any overflow and enter into contact with the solution of lavaggio.Grazie to servo valves dedicated to each tank is possible to make the emptying of tanks sun prewash. This will ensure the continuous regeneration and balanced water prewash, without waste and with immediate benefit for the washing steps subsequent. With automated unloading, in addition to, the possibility of programming the filling and the heating of the tanks in anticipation of the work session later, allows to reach the maximum level of comfort.

CONSUMPTION

3R PLUS
The gaming rinsing 3Rplus is characterized by three phases, two of which utilize circulating water and remove most of the detergent from the crockery. Thanks to the nozzles and the differentiated system break-tank with electric pump dedicated, the flow of water on the dishes is always well distributed and constant. The inverter series, a pump control rinse, for-puts to calibrate the water consumption to the actual speed of advance of the convogliatore.Inoltre, the consumption of clean water at low temperature, for cooling the prewash, is completely demolished, grazie all’optional HDR.

USER INTERFACE

SIMPLICITY 'AND COMPLETENESS

The user interface with menus tiered and differentiated access, provides comprehensive and targeted both for the user and for the technician.
Large TFT 7 "
Capacitive touch control panel
Hotkeys peri commands operator
Continuous monitoring of the working parameters
Detailed information on alerts
Information relating to the hours of operation and fuel consumption.
Historical alarms and events
Interface HACCP
Level management of chemicals and related alarms and information
Reminder scheduled maintenance
Tips to maximize performance and efficiency

H useful 450 mm

Basket 500×500 mm

Normal speed 310 racks/h

Speed ​​DIN 10510 190 racks/h

Maximum speed 360 racks/h

11160-5580/Mr

The dishwasher rack conveyor range RX OPTIMA reach new heights of efficiency.

The rinse system in three phases 3Rplus ensures water consumption considerably reduced and quality of the result. The rinse system in three phases 3Rplus ensures water consumption considerably reduced and quality of the result. The perfect thermal insulation of walls, reuse of the heat of the vapors produced inside the machine, the recovery of the heat of the water to the discharge, are some of the strengths of this range that features the cast down-chin total waste. The simplicity and ease of use characterize both the phase of work that the daily operations of cleaning and maintenance. The practical and large display simplifies access to the functions of the machine by the operator. The control panel IP55, the washing arms rack, the optional sanitizing machine and unloading system makes easier the operations end of the day.

STANDARD:

Voltage 400V3N50Hz.
Variable speed conveyor
Washing arms rack
Thermal and acoustic insulation
Isolation washing tanks
Rinse at variable flow
Centralized drain
Electrical panel IP55
Capacitive touch keypad and TFT display
Break Tank
Autotimer
Saving detergent (DDSS).
Self-cleaning battery heat recovery.
Electrical preparations dosing unit.
Interface Ready HACCP
Counter of operating hours.
Counter of water consumption,based on operating hours.
Counter power consumption,based on operating hours.
Ability to turn off the heating elements drying,during operation

OPTIONAL

HDR 200: Drying + Heat recovery.
HDRA209M ed HDRA218M:Drying + RecuperatoreTermico curve motorizzataa 90 ° or 180 °.
AS45:prewash module with filter drawer.
Emptying automated servo valves.
Sanitizing machine.
CentralinaTwindose.
Dispensers peristaltic.
Stainless steel washing pumps.
Supervisor HACCP.
Corner entry 90 ° with prewash.
Voltage 230-240V350Hz.
Extra Voltage 60Hz
Shipping more parts
BENEFITS FROM NEW HDR THERMAL RECOVERY + DRYING

Reduction of installed boiler
Reduction of installed drying
No additional consumption for maintaining the temperature of the prewash
Cooling air outlet and steam condenser.
Reduction of temperature of the waste water.
Pre-soak dishes.
HDR

The module HDR Heat recovery + Drying, achieves significant energy savings. Uses the heat, otherwise dispersed into the surrounding environment, to preheat both the rinsing water to which the air used for the asciugatura.Le working environment conditions are preserved due to the clearing of the outlet air temperature and discharge water and the total power installed is significantly reduced. The installation of this option allows the power of the machine with cold water and allows for the in-sciugatura dishes with zero operating costs compared to the same machine without optional HDR. The HDR module is available both online and on motorized curve at 90 ° or 180 ° (respectively HDR200, HDRA209M,HDRA218M).

AUTOMATED DRAINING

LESS WORK AND ALWAYS CLEAN WATER
Altermine work cycle just touch a button to empty the tanks, without needing to remove any overflow and enter into contact with the solution of lavaggio.Grazie to servo valves dedicated to each tank is possible to make the emptying of tanks sun prewash. This will ensure the continuous regeneration and balanced water prewash, without waste and with immediate benefit for the washing steps subsequent. With automated unloading, in addition to, the possibility of programming the filling and the heating of the tanks in anticipation of the work session later, allows to reach the maximum level of comfort.

CONSUMPTION

3R PLUS
The gaming rinsing 3Rplus is characterized by three phases, two of which utilize circulating water and remove most of the detergent from the crockery. Thanks to the nozzles and the differentiated system break-tank with electric pump dedicated, the flow of water on the dishes is always well distributed and constant. The inverter series, a pump control rinse, for-puts to calibrate the water consumption to the actual speed of advance of the convogliatore.Inoltre, the consumption of clean water at low temperature, for cooling the prewash, is completely demolished, grazie all’optional HDR.

USER INTERFACE

SIMPLICITY 'AND COMPLETENESS

The user interface with menus tiered and differentiated access, provides comprehensive and targeted both for the user and for the technician.
Large TFT 7 "
Capacitive touch control panel
Hotkeys peri commands operator
Continuous monitoring of the working parameters
Detailed information on alerts
Information relating to the hours of operation and fuel consumption.
Historical alarms and events
Interface HACCP
Level management of chemicals and related alarms and information
Reminder scheduled maintenance
Tips to maximize performance and efficiency