H useful 450 mm

Basket 500×500 mm

Normal speed 150 racks/h

Speed ​​DIN 10510 100 racks/h

Maximum speed 250 racks/h

5400-2700/Mr

The dishwasher rack conveyor range RX OPTIMA reach new heights of efficiency.

The rinse system in three phases 3Rplus ensures water consumption considerably reduced and quality of the result. The rinse system in three phases 3Rplus ensures water consumption considerably reduced and quality of the result. The perfect thermal insulation of walls, reuse of the heat of the vapors produced inside the machine, the recovery of the heat of the water to the discharge, are some of the strengths of this range that features the cast down-chin total waste. The simplicity and ease of use characterize both the phase of work that the daily operations of cleaning and maintenance. The practical and large display simplifies access to the functions of the machine by the operator. The control panel IP55, the washing arms rack, the optional sanitizing machine and unloading system makes easier the operations end of the day.

STANDARD:

Voltage 400V3N50Hz.
Variable speed conveyor
Washing arms rack
Thermal and acoustic insulation
Isolation washing tanks
Rinse at variable flow
Centralized drain
Electrical panel IP55
Capacitive touch keypad and TFT display
Break Tank
Autotimer
Saving detergent (DDSS).
Self-cleaning battery heat recovery.
Electrical preparations dosing unit.
Interface Ready HACCP
Counter of operating hours.
Counter of water consumption,based on operating hours.
Counter power consumption,based on operating hours.
Ability to turn off the heating elements drying,during operation

OPTIONAL

HDR 200: Drying + Heat recovery.
HDRA209M ed HDRA218M:Drying + RecuperatoreTermico curve motorizzataa 90 ° or 180 °.
AS45:prewash module with filter drawer.
Emptying automated servo valves.
Sanitizing machine.
CentralinaTwindose.
Dispensers peristaltic.
Stainless steel washing pumps.
Supervisor HACCP.
Corner entry 90 ° with prewash.
Voltage 230-240V350Hz.
Extra Voltage 60Hz
Shipping more parts
BENEFITS FROM NEW HDR THERMAL RECOVERY + DRYING

Reduction of installed boiler
Reduction of installed drying
No additional consumption for maintaining the temperature of the prewash
Cooling air outlet and steam condenser.
Reduction of temperature of the waste water.
Pre-soak dishes.
HDR

The module HDR Heat recovery + Drying, achieves significant energy savings. Uses the heat, otherwise dispersed into the surrounding environment, to preheat both the rinsing water to which the air used for the asciugatura.Le working environment conditions are preserved due to the clearing of the outlet air temperature and discharge water and the total power installed is significantly reduced. The installation of this option allows the power of the machine with cold water and allows for the in-sciugatura dishes with zero operating costs compared to the same machine without optional HDR. The HDR module is available both online and on motorized curve at 90 ° or 180 ° (respectively HDR200, HDRA209M,HDRA218M).

AUTOMATED DRAINING

LESS WORK AND ALWAYS CLEAN WATER
Altermine work cycle just touch a button to empty the tanks, without needing to remove any overflow and enter into contact with the solution of lavaggio.Grazie to servo valves dedicated to each tank is possible to make the emptying of tanks sun prewash. This will ensure the continuous regeneration and balanced water prewash, without waste and with immediate benefit for the washing steps subsequent. With automated unloading, in addition to, the possibility of programming the filling and the heating of the tanks in anticipation of the work session later, allows to reach the maximum level of comfort.

CONSUMPTION

3R PLUS
The gaming rinsing 3Rplus is characterized by three phases, two of which utilize circulating water and remove most of the detergent from the crockery. Thanks to the nozzles and the differentiated system break-tank with electric pump dedicated, the flow of water on the dishes is always well distributed and constant. The inverter series, a pump control rinse, for-puts to calibrate the water consumption to the actual speed of advance of the convogliatore.Inoltre, the consumption of clean water at low temperature, for cooling the prewash, is completely demolished, grazie all’optional HDR.

USER INTERFACE

SIMPLICITY 'AND COMPLETENESS

The user interface with menus tiered and differentiated access, provides comprehensive and targeted both for the user and for the technician.
Large TFT 7 "
Capacitive touch control panel
Hotkeys peri commands operator
Continuous monitoring of the working parameters
Detailed information on alerts
Information relating to the hours of operation and fuel consumption.
Historical alarms and events
Interface HACCP
Level management of chemicals and related alarms and information
Reminder scheduled maintenance
Tips to maximize performance and efficiency

RX 250

Useful height 450 mm

Basket 500×500 mm

Normal speed 150 racks / h

DIN 10510 Speed ​​100 racks / h

Max 250 racks / h

5400-2700 / Mr

Thanks to the dishwasher basket wheel drive RX OPTIMA, new objectives, in terms of efficiency, have been achieved.

3R Plus, rinse 3 step system ensures a considerable reduction of water as well as a result of unparalleled quality. The perfect thermal insulation of the walls, the reuse of heat generated by the steam inside of the machine, the recovery of heat from the water for the drain, are among the strong points of this range which boasts the total slaughter waste.
The ease of use and comfort characterize either the working phase, that daily cleaning and handling.
The practical and full control panel simplifies access to the machine functions from the operator. The IP5 control panel, the wash arms that are grouped on racks and are easily removed without tools; options “Auto Cleaning” and “Automated Change” make it easy to end day operations.

SERIAL

Voltage 400V3N 50HZ
Variable speed conveyor
wash arms together on racks
Thermo acoustic insulation
Isolation wash units
Rinsing variable rate
Centralized drain
IP55 electrical panel
Capacitive touch panel TFT screen
Break Tank
Autotimer
Detergent saver
Auto Cleaning battery heat recovery
Electrical predispositions dosing unit
Predisposition HACCP interface.
Counter of operating hours
Water consumption meter based on hours of operation
Counter power consumption based on hours of operation
Possibility to turn off the resistors during the drying operation of the machine
OPTIONS

HDR 200: Drying + Heat exchangers
HDRA 209M and 218m HDRA: Drying + Heat exchangers on motorized turn 90 ° and 180 °
AS45: prewash module with filter drawer
Automated servo valves with drain
Auto Cleaning Machine
Twin Unit Dose
Batcher peristaltic
Washing pumps in stainless steel
HACCP supervisor
Input angle 90 ° with prewash
Voltage 230-240V3 50HZ
Extra Voltage 60HZ
Shipping in pieces
PROFITS MADE BY THE NEW SYSTEM HEAT HEAT + DRY

Reducing power installed in the boiler
Reduction in installed capacity in the drying
No consumption in addition to maintain the temperature in prewash
Cooling of the air at the outlet of steam and condensation
Reducing the temperature of the drain water
Pre-soak dishes.
HDR
MORE THAN HEAT RECOVERY
The heat exchanger HRD + module drying, provides significant energy savings. It exploits the heat otherwise dispersed in the environment itself to preheat the rinse water as air used for drying.
The conditions in the working area are preserved by reducing the air temperature at the outlet and the drain water; the total installed capacity is thus significantly reduced.
The installation of this option to feed the machine with cold water and allows for drying dishes with zero operative costs compared to the same machine without HRD option.
The HRD module is available either online on mechanized turn 90 ° or 180 ° (respectively HDR 200, 209M HDRA, HDRA 218m). DRAIN AUTOMATED LESS WORK AND ALWAYS CLEAN WATER At the end of the work cycle it is enough to touch a button to empty the tanks without the need to remove the excess and get in touch with the detergent. With servo dedicated to each tank, it is possible to just empty the tanks of prewash. In this way it is ensured the continuous and balanced regeneration water prewash without waste and with an immediate benefit for the following wash phase. In addition, through the central drain, we can program the filling and heating tanks in preparation for the subsequent work session, reaching as total comfort level.

CONSUMPTION
3R PLUS
PLUS The new 3R flushing system is characterized by three successive rinsing phases; two of which use water recirculation and remove most of the dishwashing product.
With differentiated jets and Break Tank system with dedicated electric pump, the flow of water on the dishes are always well distributed and constant. The serial speed controller which controls the flushing pump, used to calibrate the water consumption to the actual speed of the conveyor. Moreover, thanks to the HDR option, the consumption of clean water at low temperature for cooling the pre-wash is completely canceled.

INTERFACE
AND ENTIRE semplicity
user interface with multi-levels and differentiated access menu, ensures comprehensive and targeted information for both the user and the technician.

TFT panel 7 ”
Capacitive Touch panel controls
Quick key operator commands
Continuous monitoring of operating parameters
Detailed information on alarms
Information on hours of work and consumption
History of alarms and events
Between HACCP-face
Management of chemical products and relative levels of alarms and information
Scheduled reminder for maintenance
Proposals to maximize results and efficiency.